For the AutoLock® batons we've designed our Front Draw® Holder with Clip-On backs to work specifically with this design. Made from durable polycarbonate, all holders feature a molded tension spring for baton security. The design is comfortable to wear and offers a quick draw from any position.
Features:
The holder rotates in 360 degrees and locks in one of 8 locking positions
To order a Front Draw® Holder that only goes 45 degrees forward and backward add a /L after the item number
This 45 degree option is appropriate for an officer is using the 26" (66.04 cm) baton with the Hindi Baton Cap™ installed on it
Also an option for anyone concerned about their baton rotating too far in the holder
The baton may be re-holstered in the locked position either open or closed, as necessary, saving time to control the suspect
Offered in clip-on or slide-on style
21" (53.35 cm) baton holder has the half moon bottom for Safety Tip® style baton
18" (45.72 cm), 22" (60.96 cm) and 26" (66.04 cm) baton holders have the horizontal cut bottom to be able to receive the Power Safety Tip™ style baton.
Remember: You need the appropriate holder for the style of AutoLock used. This is to facilitate the ability of the officer to put the baton in the holder while in the locked open position.
The baton may be re-holstered in the locked position either open or closed, as necessary, saving time to control the suspect
For Clip-ons only: The pad is used to put on the inside back of the clip on back to maintain the holder from moving on the duty belt If using the 2 " (5.715 cm) belt, the pad may or may not be necessary depending on the thickness of the belt. You might place undue stress on the holder. Note: You may use the pad for off duty belts
Accommodates either the Foam grip or Super Grip®
Note: when using a baton with the Super Grip® slightly twist the Super Grip® when drawing from the holder and slightly twist it when returning it to the holder for easier functionality. The Super Grip® is very tactically retentive so it grabs the holder for excellent baton retention
You can take the holder off the belt without stripping the whole belt
Fits: 2.25" (5.715 cm) belt widths
Make sure the proper holder is chosen to the appropriate AutoLock® baton. This is important as far as high or low carry of the baton is concerned. Good balance is important for the ease and comfort of wear to the officer.
For the AutoLock® batons we've designed our Front Draw® Holder with Clip-On backs to work specifically with this design. Made from durable polycarbonate, all holders feature a molded tension spring for baton security. The design is comfortable to wear and offers a quick draw from any position.
Features:
The holder rotates in 360 degrees and locks in one of 8 locking positions
To order a Front Draw® Holder that only goes 45 degrees forward and backward add a /L after the item number
This 45 degree option is appropriate for an officer is using the 26" (66.04 cm) baton with the Hindi Baton Cap™ installed on it
Also an option for anyone concerned about their baton rotating too far in the holder
The baton may be re-holstered in the locked position either open or closed, as necessary, saving time to control the suspect
Offered in clip-on or slide-on style
21" (53.35 cm) baton holder has the half moon bottom for Safety Tip® style baton
18" (45.72 cm), 22" (60.96 cm) and 26" (66.04 cm) baton holders have the horizontal cut bottom to be able to receive the Power Safety Tip™ style baton.
Remember: You need the appropriate holder for the style of AutoLock used. This is to facilitate the ability of the officer to put the baton in the holder while in the locked open position.
The baton may be re-holstered in the locked position either open or closed, as necessary, saving time to control the suspect
For Clip-ons only: The pad is used to put on the inside back of the clip on back to maintain the holder from moving on the duty belt If using the 2 " (5.715 cm) belt, the pad may or may not be necessary depending on the thickness of the belt. You might place undue stress on the holder. Note: You may use the pad for off duty belts
Accommodates either the Foam grip or Super Grip®
Note: when using a baton with the Super Grip® slightly twist the Super Grip® when drawing from the holder and slightly twist it when returning it to the holder for easier functionality. The Super Grip® is very tactically retentive so it grabs the holder for excellent baton retention
You can take the holder off the belt without stripping the whole belt
Fits: 2.25" (5.715 cm) belt widths
Make sure the proper holder is chosen to the appropriate AutoLock® baton. This is important as far as high or low carry of the baton is concerned. Good balance is important for the ease and comfort of wear to the officer.
Finishes: Plain, Basketweave
EMI Details
Size Chart
Personalization
Select location where you would like to add embriodery. One from right,one from left.
Right
Left
1234567
*Personalization previews are intended for demonstration purpose only.Actual size and font style may vary.
Add up to 3 lines of embroiderable text and/or choose logo from our extensive collection of unique emblems.
Right
Left
Right Configuration
Right Preview
Line 1Line 2Line 3
12
Left Preview
Line 1Line 2Line 3
*Personalization previews are intended for demonstration purpose only.Actual size and font style may vary.